Banner Sponsors
For artists and collectors sponsored by Intercal...your mohair supplier and Johnna's Mohair Store
Tracy's bearshi hope you can help i had this pattern for sometime but have not made it before tell yesterday,
cut it and hand saw it together but the head is very mist shaped and looks nothing like the picture on the pattern, i have restitched and re stuff it about five time but it still looks nothing like it should,
i was wondering if any of you have had this pattern and can tell me were im going wrong
Maybe show us photos of the head you've made? And of the pattern pieces?
Becky
Tracy's bearsthis is the pattern i coped it to the computer and printed it off.
and this is a picture of the head made up.
Hello Tracy,
I believe the head in the photo is needle-sculpted between the eyes to make eyes sockets and the bridge of the nose. I would make the head following the steps below:
1. Sew the head, stuff and close it as described. Make sure the stuffing is hard enough, otherwise you will have wrinkles on the head when you do needle-sculpting on it.
2. Sew, stuff and attach the muzzle as described.
3. Needle-sculpt the head (with the muzzle already attached) between the eyes.
4. Attach ears, embroider the nose and mouth.
I hope that helps. Good luck with the head! It's an interesting pattern, I have never seen anything like that before.
Best wishes, Olga
It is an unusual pattern. In your photo, is the muzzle/nose piece attached? (It seems like there should be a bulbous nose area protruding, and I don't see that.)
Regarding the lumps and bumps, I'd guess that sewing 8 darts (plus the four for the muzzle) and then sewing together two cup-shaped head pieces led to some odd shapes. It will be interesting to hear what Lanie says if she gets back to you.
Becky
I made a picture, sorry for my English 
In the picture you can see my vision of how to work with the pattern. I hope it helps.
Olga, you are amazing! This is so clearly explained - in words and pictures. 
Becky
Thank you Becky I hope Tracy will show us the completed bear very soon 
Northern IrelandBrilliant instruction and such clear diagrams. Thank you Olga for sharing your expertise .
Something I didn't grasp when I first started bearmaking was the important role of stuffing in achieving the shape you wanted. After I took an on-line course I learnt to stuff as if my eyes were closed and so moulded the head on the outside feeling the shape with my hands whilst making sure every nook and cranny was stuffed firmly. Look forward to seeing your little Teddybear.
Thank you Renee, I'm happy to be helpful 
Posts: 14I would be very grateful for any tips and advice on joint placement markings on body patterns, either how to mark accurately while drafting patterns or checking joint placements for arms and legs on both two and four piece body patterns which are either bought or freely available to download. Thanks in advance.Mary.
Tracy's bearsthank for all the help and messages
i messed around with it so much the fabric rip so put it all to one side and have not picked it up again,
then a few day later i fracture my arm and hand sewing was i not go.
but it is getting better now so will have another go soon
